PRO-5

Heavy-duty, 1 axis Cast Joystick with Valve Drive Board and Mechanical Interlock.

Valve Drive Boards are available to control 12 or 24 volt valves, direct or remote mounted.

The ultra-rugged PRO-5 also provides precise proportional control for AC/DC variable speed drives and industrial vehicles.

Your specific control requirements can be accommodated by a variety of standard and custom configurations.

NEMA 4 cast construction for use in wet and dirty environments.

Universal mounting holes.


Applications
This weatherproof design is ideal for use on Scissor Lifts, Work Platforms, Bucket trucks, Cranes, Agricultural, Mining and Forestry equipment where control of electro / hydraulic proportional valves or variable speed drives is desired.

Features
  • Versatile design
  • Heavy duty construction
  • Long life, compression type return spring system
  • 20 million cycle mechanical operating life
  • Rugged 10mm diameter handle shaft
  • Tooled, fixed cams


Options
  • Multiple mounting systems
  • Friction held handle
  • Large variety of handle configurations including deadman and mechanical interlock options
  • Bang / Bang design
  • Large selection of proportional outputs including potentiometer, Hall-effect, PWM and CAN Bus
  • Hall-effect output meets or exceeds CE EMC requirements


PRO-5 Mechanical data
 Life 20 million cycles
 Materials Cast housing and gasketing for outdoor use with plated steel side plates with self lubricating bearings, hard nickel chromium spring return arms, compression style return spring and brass gears.
 Temperature range -25 to +70 degress C
 Handle travel +/- 36 degrees for proportional
+/- 20 degrees for Bang/Bang
 Potentionmeter rotation +/- 126 degrees
 Gasketing TO IP66
 Maximum number of contacts (4) snap action switches with potentiometer
(6) without potentiometer.
 Panel space requirement 2.95" x 3.62" (Footprint of Joystick Mounting)
 Mounting dimensions See PRO-5 literature PDF above
PRO-5 Electrical data
 Snap action switch rating 11A @ 125, 250 VAC
 Terminal .187 x .020 male Q.C.
 Maximum wire size 18 AWG
 Potentiometer 10k 4-wire 0.5W, conductive plastic, 5 million cycles
5k 3-wire 0.5W, conductive plastic, 5 million cycles
 Hall-effect Supply Voltage: 4.5 to 5.5 VDC

Output Voltage:
Ratiometric 0.5 - 2.5 - 4.5 +/- 0.15V @ 5.0V supply

Output Current: 10mA

Power Consumption: 20 mA @ full load

EMC Emissions:
Complies with EN61000-6-4:2007 Class A Group 1, 80-1000 MHz

EMC Immunity:
Complies with or exceeds EN6100-6-2:2005, expanded to include:
RFI Immunity of 100 V/M @ 80-1000 MHz
ESD Immunity of 15Kv air, 8Kv contact
Bronze castings for marine applications available upon request.

See a complete listing of technical data in PRO-5 literature.

Service bulletins
pro5_service_bulletin.pdf

Catalog literature


Design documents
Electrical, contacts & gate design specifications

Blank contact target sheet




Adobe Acrobat 5.0 (or higher) is required.
Download Acrobat